CYCLONE BOX GPG

Home > BOX FLASHER HANDPHONE > BOX FLASHER NOKIA > CYCLONE BOX GPG

CYCLONE BOX GPG

Nomor Produk 65
Tersedia 1
Warna
Bahan
Harga Rp. 0,00
Tanggal Publish 15 Feb 2011


 

Overview Produk

Installer v1.12
09.03.2011

=====================

- Firmware v1.55 introduced - RAP4 CMT Booting (Wrong first char) fixed
- Added SP unlock via server / log2cod reading
- Added standalone SX4 auth
- Added standalone Superdongle Keys Repair
- Supported phones:
- RAPU Based: 5630, 6260s, 6700c, 6700s, 6710n, 6720c, 6730, 6750, E52, E55, E72
- RAP4 Based: 3710, 5330, 7230, 6303i, X3
- Minor changes and bugfixes

Installer v1.11
07.03.2011

=====================

  • New BB5 FBUS/USB Loaders v10.48.1 introduced
  • DCT4/BB5 Product/Variant caching added. Saves lot of time when selecting correct Datapackage. This is done
  • automaticcly. During Deletion or Installing some of DP, cache is rebuilt automatically on user demand.
  • XGold2 USB Flashing Introduced (C1-01,C1-02,C2-00,...)
  • Added XGold2 RPL Backup (including CCC,HWC,NPC,Simlock) FIRST in the world. The backup is created
  • automatically during flash.
  • Added XGold2 RPL Write (CCC,HWC,NPC and Simlock) seems FIRST in the world. In order to write RPL file,
  • you need flash your phone and add RPL file as secondary flashing Image (Add XGold2 RPL button).
  • XGold2 RPL Contains FULL phone security, possible to Full restore after Flash Chip change
  • Added XGold1 Unlocking by Reading LOG2COD Log file
  • Added XGold1 Low-Level PM Dumping (both Secured and Nonsecured areas), seems 1st in world
  • Added XGold1 Low-Level RPL Backup, seems 1st in world
  • XGold1 Backed-up RPL file might be used to completly Re-Initialize phone security, i.e. after flash-chip change (RPL
  • Contains IMEI and Simlock Block), seems 1st in world...
  • Both XGold1 Low Level dumps support dead phones (phone might be dead, Cyclone will binary dump PM from flash chip directly)
  • Added XGold1 Low-Level Deleted PM Keys dumping (extra option-don't write back readen PM file with deleted keys, they are ASCII marked as deleted ones). Support deleted messages, contacts, ..., seems 1st in world
  • Added XGold1 FBUS/Keyboard SL Bad Entries Counter reset, seems 1st in world
  • Reading XGOLD1 LOG2COD is fully standalone, seems 1st in world
  • XGold1 Unlock/RPL supported mobiles: 1616, 1280, 1208, 1209, 1800, C1-00, and others...
  • Added "Mapped At" FlashChip information during XGold Flashing, when possible
  • Added "Sector Size" FlashChip information during XGold Flashing, when possible
  • No reboot flashing for XGold added
  • APE block flashing fixed for various RAPIDO mobiles
  • Fixed Old Protocol (Dead) USB Flashing (RAPIDO phones: N86,etc)
  • Fixed Blackberry Module upon reading MEP via USB it was placing it on wrong window
  • Assigned COD files are now verified before sending to server, the auxiliary verification also takes place at Server Side
  • Fixed OpenDialog filter when adding DCT4/BB5 flash file
  • log2cod: v1.1 Released
    log2cod: GPU Selftests added (some GPU find bad code, or didn't find anything at all)
  • log2cod: Added Ivan Golubev EULA
  • log2cod: Added Queue managment
  • log2cod: Code Verification added after successfull calculation
  • log2cod: Console is cleared after some salts processed in order to avoid overflow
  • log2cod: PeekNamedPipe() problem fixed
  • log2cod: Added queue processing in loop mode (you can add new jobs during calculation)
  • The transaction bar have been a bit resized
  • Cyclone Box HW Rev B11x, C11x added
  • Models.ini updated
  • Box USB Drivers updated to v1.0.0.6 they are digitally signed now, no more problems on Win7 / Win Vista x64
  • COM Emulation Service Driver updated to v1.0.0.1 it is digitally signed now, no more problems on Win7 / Win Vista x64
  • Main Software is now Digitally Signed (Authenthicode)
  • log2cod is now Digitally Signed (Auhtenthicode)
  • Cyclone Calculator is now Digitally Signed (Authenthicode)
  • Installer is now Digitally Signed (Auhtnethicode)
  • New phones added to Virgin SX4 Database
  • New phones added to Security Database (Virgin RPL)
  • Box Firmware v1.53 Released
  • Some minor and major changes and bugfixes
  • Versions snap
  • Installer v1.11
  • Main x86 Application v1.0.0.11003
  • x86 Memory Manager v4.76.0.179
  • Native USB Drivers v1.0.0.6
  • USB-COM Stack Drivers v1.0.0.1
  • Onboard Secure Bootloader v2.13
  • Onboard Main Nokia Application v1.53
  • Onboard COM Emulation Code v1.00
  • Onboard Security Card Revision v1.10
  • Nokia Connectivity Cable Drivers 7.1.34.0
  • BB5 USB/FPIF Single Line/FPIF DualLine v20110301
  • DCT4 FPIF Single Line/USB v20100410
  • DCT4 Unlock Patches DEPRECATED
  • Communication Stack SSLv3-keys-06092008
  • Skin Stack v7.21
  • Box Firmware v1.53 is needed.

Cyclonebox supports following BB5 phones for Unlock:

PA_SL1 & PA_SL2 Supported Phones:

N70 (RM-84) N71 (RM-112) N72 (RM-180) 6680 (RM-36) 6681 (RM-57) 6682 (RM-58) 3109c (RM-274) 3110c (RM-237) 3250 (RM-38) 3500c (RM-272) 3500cb (RM-273) 5200 (RM-174) 5200b (RM-181) 5300 (RM-146) 5300b (RM-147) 5500 (RM-86) 6085 (RM-198) 6086 (RM-188) 6086b (RM-260) 6125 (RM-178) 6126/6133 (RM-126) 6131 (RM-115) 6131 NFC (RM-216) 6136 (RM-199) 6151 (RM-200) 6233 (RM-145) 6234 (RM-123) 6280 (RM-78) 6300 (RM-217) 6300b (RM-222) 7370 (RM-70) 7373 (RM-209) 7390 (RM-140) 8600 (RM-164) E50 (RM-170) E50 (RM-171) E50 (RM-172) E60 (RM-49) E61 (RM-89) E61i (RM-227) E62 (RM-88) E65 (RM-208) N70 (RM-84) N70-5 (RM-99) N71 (RM-67) N73-1 (RM-133) N73-5 (RM-132) N75 (RM-128) N77 (RM-194) N80-1 (RM-92) N80-3 (RM-91) N90 (RM-42) N91-1 (RM-43) N91-8GB (RM-43) N91-5 (RM-158) N92 (RM-100) N93 (RM-55)

PA_SL2 RAPIDO Supported Phones:

N78 (RM-235) N78-2 (RM--236) N79 (RM-348) N81 (RM-256) N81-3 (RM-223) N81-8GB (RM-179) N82 (RM-313) N82-2 (RM-314) RM85 (RM-333) N95 (RM-159) N95 (RM-245) N95 (RM-160) N95-8GB (RM-320) N95-8GB (RM-321) N96 (RM-247) N96 (RM-274) N96 (RM-472) 5310 (RM-303) 5310-2 (RM-304) 5320 (RM-409) 5320-2(RM-416) 5610 (RM-242) 5610d (RM-358) 5610XpressMusic (RM-279) 5610XpressMusic (RM-431) 5700 (RM-230) 5700 (RM-302) 5800 (RM-356) 6110 (RM-186) 6110Navigator (RM-122) 6120C (RM-310) 6120Classic (RM-243) 6122c (RM-425) 6124cLASSIC (RM-422) 6210Navigator (RM-367) 6210S (RM-386) 6212C (RM-396) 6220C (RM-387) 6290 (RM-176) 6500C (RM-265) 6500C-2 (RM-397) 6500S (RM-278) 6500Slide (RM-240) 6650Fold (RM-400) E90 (RA-6) N76 (RM-135) N76 (RM-149) E71 (RM-346) E71-2 (RM-493) E75 (RM-412) E51 (RM-244) E51-2 (RM-426) E66 (RM-343) E66-2 (RM-494)

Supported models:
All known DCT4 models

1100, 1100, 1101, 1108, 1110, 1110, 1110i, 1112, 1112, 1112i, 1600, 1600, 2112, 2125i, 2126i, 2128i, 2255, 2300, 2300, 2355, 2600, 2600, 2650, 2651, 2652, 2760 Americas, 2760 Europe/Asia, 3100, 3105, 3108, 3120, 3120, 3125, 3128, 3129, 3152, 3155, 3155i, 3200, 3205, 3205i, 3220, 3220, 3230, 3300, 3300, 3320, 3321, 3360, 3361, 3510, 3510i, 3520, 3530, 3560, 3570, 3585, 3586, 3586i, 3587, 3587i, 3588i, 3589i, 3590, 3595, 3595i, 3600, 3620, 3650, 3660, 5070, 5070, 5100, 5140, 5140, 5140i, 6010, 6012, 6015, 6015i, 6016i, 6019i, 6020, 6020, 6021, 6030, 6030, 6050, 6060, 6060, 6061, 6070, 6070, 6080, 6080, 610, 6100, 6101, 6101, 6101, 6102, 6102, 6102, 6102, 6103, 6103, 6108, 6111, 6112, 6152, 6155, 6155i, 616, 6170, 6170, 6200, 6220, 6225, 6225i, 6230, 6230, 6230i, 6235, 6235i, 6236i, 6255, 6255i, 6256, 6256i, 6260, 6260, 6310, 6310i, 6340, 6340i, 6360, 6370, 6385, 6500, 6510, 6560, 6585, 6590, 6590i, 6600, 6610, 6610i, 6620, 6650, 6651, 6670, 6670, 6800, 6800, 6810, 6820, 6820, 6820i, 6822, 6822, 7200, 7210, 7250, 7250, 7260, 7270, 7270, 7280, 7280, 7360, 7380, 7600, 7610, 7610, 7620, 7650, 7700, 7710, 810, 8310, 8390, 8587, 8800, 8800 Sirocco Edition, 8801, 8910, 8910i, N-Gage, N-Gagee QD

All known DCT4+ models

1200, 1208, 1208b, 1650, 1650b, 1680c-2b Classic, 2310, 2610, 2610b, 2626, 2630 Americas, 2630 Europe/Asia, 2670h

All known ASIC11 models

DCT-4 Features:

* Flash software(upgrade/downgrade)
* Unlock SP simlocks
* Lock phone TO any network
* Rebuild IMEI on latest models too
* Flash Bluetooth * Save User Settings
* Full UI Defaults
* UI Factory Defaults
* Full Factory Defaults
* Software Upgrade Defaults
* Reset User Lock (Security code)

Supported DCT-L Models:

* 9290, 9210, 9210i (communicator)

DCT-L Features:

* Flash softrware (upgrade/downgrade)
* Unlock
* Set FAID
* Rebuild IMEI
* Set UI Defaults

Supported BB5 models:
All known BB5 models

3109 Classic, 3110 Classic, 3120 Classic, 3250, 3500 Classic, 3600 Slide, 3610 Fold, 5200 XpressMusic, 5200, 5220 XpressMusic, 5300 XpressMusic, 5310 XpressMusic, 5320 XpressMusic, 5500, 5500 Sport, 5610 XpressMusic, 5700 XpressMusic, 5710 XpressMusic, 6085, 6086, 6110 Navigator, 6120 Classic, 6121 Classic, 6124 Vodafone, 6125, 6126, 6131, 6131 NFC, 6133, 6135, 6136, 6151, 6210 Navigator, 6212 Classic, 6220 Classic, 6233, 6234, 6267, 6270, 6280, 6282, 6288, 6290, 6300, 6300i, 6301, 6500 Classic, 6500 Slide, 6555, 6555 Classic, 6556 Classic, 6600 Fold, 6600 Slide, 6630, 6631 (NM850iG), 6650 T-Mobile, 6680, 6681, 6682, 7310 Supernova, 7370, 7373, 7390, 7500 Prism, 7510 Supernova, 7610 Supernova, 7900 Prism, 8600 Luna, 8800 Arte, E50, E51, E60, E61, E61i, E62, E65, E66, E70, E71, E90 Communicator, N70, N71, N72, N73, N75, N76, N77, N78, N79, N80, N81 8GB,N82, N85, N90, N91, N92, N93, N93i, N95, N95 8GB, N95 NAM, N95 8GB NAM, N96

BB5 Features:

* Flash software (upgrade/downgrade)
* USB high speed flash supported
* Easy RPL service for demaged phones o Sim lock and IMEI rebuild to factorial state
* Save User Settings
* Set product code after flashing
* Full UI Defaults
* UI Factory Defaults
* Full Factory Defaults
* Software Upgrade Defaults
* Reset / read User Lock (Security code)

 

 

Produk kami yang lain